Vinyl Application

1. Clean the surface you are going to be applying the vinyl too (glass,wood, paper,etc)
2. Peel apart the top from the bottom layer. The vinyl should come off of the back and still be stuck to the top layer (transfer tape)
3. Place on surface
4. using a squeeqe, popscicle stick or ruler go along the entire image
5. Peel off the top layer (transfer tape)
It should come off easily...If the letters are coming up still, use your sqeeque again until it sticks.
After you've removed all the transfer tape you are all done
Then I added mine to a frame

blogger template by lovebird